|
Pre Wired Conduit
BS8436
IEC61034-2
BS EN 50267-2-1
BS EN 60332-1, IEC 60332-1
BS7671:2001
BS8436
522-06-06
Concordia Fixed Wiring Cable has been specifically developed for applications where cables are required to be concealed within thin partitions and building voids, complying with amendment No 2, 2004 to the wiring regulations BS7671:2001 and with BS8436 as referred to in regulation 522-06-06.
Concordia Fixed Wiring Cable principal benefit is the ability for an electrical circuit to fail safe, operating a 32A Type B circuit breaker, in the event of the cable being penetrated by a nail. This is the main performance requirement of cables to BS8436. Until these changes to the standards, more expensive installation methods using conduit or SWA cables were the main choices for cable protection used in fixed wiring applications.
In essence Concordia Fixed Wiring Cable is a protected fixed product, with a bonded aluminium tape which gives excellent mechanical resistance and an effective screen to help reduce electrical interference.
As a safety cable Concordia Fixed Wiring Cable has been independently Type tested by ERA Technology Ltd and Warrington Fire Research Centre Ltd to all relevant standards.
Concordia Fixed Wiring Cable comes in two ranges:
Concordia Fixed Wiring Cable LD 300/500v:
BS8436. Available in 2, 3 and 4 cores, 1.0mm2 to 2.5mm2, solid or stranded conductors each having a CPC of equal cross sectional area.
Concordia Fixed Wiring Cable 600/1000v:
Manufactured and tested to the material and performance criteria of BS8436. Available in 2, 3 and 4 cores, 1.0mm2 to 6.0mm2, stranded conductors each having a CPC of equal cross sectional area.
Both ranges come in White as standard, other colours available on request. Core colours as the harmonised wiring codes, others available on request.
Supplied as standard on 100m reels other lengths available by request
If you would like to place an order or require any additional information please contact:
Terry Fidgett
|
